Ford E4OD Transmission c/w Filter Kit 1990-1994

Ford E4OD Transmission c/w Filter Kit 1990-1994

Regular price
$3,130.00
Sale price
$3,130.00

The stock transmission is designed to handle the output of the stock engine, but not much more. Increase the durability of your drivetrain with a BD transmission. All transmissions come with BD's heavy duty transmission pan and most packages come bundled with our auxiliary transmission filter kit for added protection! FEATURES Machined center support Machined intermediate piston Machined low/reverse pressure plate Machined rear ring gear hub Added lube circuits to OD planet Added lube and support to output and intermediate shafts Replaced all aluminum planetaries with steel Drilled and tapped direct and intermediate feeds to prevent leaks at case Re-programmed accumulator body Full shift kit with line mod valve to increase pressures Accumulator body enhanced oil flow Increased cooler pressure Increased pressure to converter Creates positive clutch application Created lube circuit for towing in overdrive 1990-2003 include auxiliary frame mounted full flow filter kit Clutch Count: COAST CLUTCH 2 Clutch Count: FORWARD 5 Clutch Count: DIRECT 5 Clutch Count: LOW REVERSE 7 Clutch Count: INTERMEDIATE 4 Clutch Count: OVERDRIVE 4 Pan adds 6qt extra oil capacity Fully rollerized geartrain Tighter clutch packs that provide a quicker shift 30%-40% more clutch material with additional steels Improved internal lubrication by adding high power boost valves Reworked front pump Improved bearing designs Upgrade supports Upgraded sprags Sure-loc snap rings Solenoids hard wiring providing high temperature resistance Increase the durability of your drivetrain Revised oil circuits Handles up to 300% more power and torque than the stock transmission Extra clutches and stronger internals BD rigid aluminum heavy duty transmission pan Pan reduces case flex Pan reduces internal oil leakage Pan heat-dissipating fins keep temperature down Pan magnetic drain plug Not warranted for Race or Sled Pull use Each transmission is dyno tested INSTALL TIME 7 Hours WARRANTY Parts 36-Months 150,000 Miles Labour 12-Months 24,000 miles Note No Race abuse covered. Remote filter required for inspection with cooler flow rate in GPM at Oil/Air transmission cooler outlet. NOTE Add "PTO" to part number for PTO provision (i.e. 1064444FPTO or 1064444FPTOLR) BD torque converter must be installed at the time of installation of the transmission - use of a 3rd party or OE converter will invalidate the transmission warranty